Stylus type Air cylinder type General-purpose Sensor head (Low measuring force type) GT2-PA12L

GT2-PA12L - Stylus type Air cylinder type General-purpose Sensor head (Low measuring force type)

*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.

Specifications

Model		GT2-PA12L
Detection system		Scale Shot System II, absolute (no tracking errors) type
Measuring range		12 mm
Resolution		0.5 µm
Indicated accuracy		2 µm (P-P)^*1
Measuring force	Downward mounting	0.4 N^*2
	Side mounting	0.35 N^*2
	Upward mounting	0.3 N^*2
Sampling cycle		4 ms
Fluid used		Clean dry air
Operation indicator light		2-color LED (red, green)
Environmental resistance	Enclosure rating	-
	Pressure resistance	0.5 MPa
	Applied pressure range	0.05 MPa to 0.07 MPa
	Ambient temperature	0 to +55 °C (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s² (IEC60068-2-27)
Materials	Main body	Main body case: SUS 303, Status indicator: PET, Sensor head-relay connector cable: PUR, Relay connector: PBT
	Contact	SUS304, SUS440C^*3
Sensor head cable		Optional (connect to relay connector)
Weight		Approx. 35 g (not including cable)^*4
^1 Value when the ambient temperature is 20 °C. ^2 Representative value at the centre of the measuring range. Please note that the measuring force varies by the installation state of the dust boot. This is a representative value when using the GT2-PA12KL/PA12L with a pressure of 0.06 MPa. The measuring force varies depending on the air pressure used. For details, see table 1.No dust boots are used with the GT2-PA12KL/PA12L. ^3 Contacts are available as options sold separately. ^4 Including the relay connector.