Long range Sensor main unit Sanitary model FR-LS20

FR-LS20 - Long range Sensor main unit Sanitary model

*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.

Specifications

Model		FR-LS20
Type		Long range Sanitary model
Measuring range		Up to 20 m ^*1
Display range		Up to 25 m ^*1
Measurable dielectric constant of medium		2 or higher ^*2
Resolution		1 mm
Precision		Up to 0.1 m: ±10 mm; 0.1 to 10 m: ±1 mm; 10 to 20 m: ±2 mm ^*3
Response time		0.4 s, 1.5 s, 4 s (default value), 10 s
Tank pressure		-0.1 to +1 MPa
Material	Tank interior	Lens: PTFE Ferrule Internal Packing: EPDM (when using OP-88920) Ferrule: SUS316L (when using OP-88888/88889)
	Housing	SUS304
Connection diameter		2 S ferrule
Output	No. of control outputs	Maximum 5
	Control output/auxiliary output	NPN/PNP open collector (switching type) 30 VDC or less, max 50 mA for each Residual voltage of 1.4 V or less (50 mA or less) N.O./N.C. Switching type IO2 used in combination with IO-Link
	Analogue output	0–20 mA/4–20 mA maximum load resistance 260 Ω (Response time: 0.2 s after judgment output is confirmed [90% response])
External input		─
Network compatibility		IO-Link v1.1/COM2
Analogue output Precision	Resolution	1 mm ^*4
	Zero accuracy	±0.1 mA (zero point = 4 mA) ^*4
Analogue output accuracy	F.S. accuracy	±0.2 mA (full-scale = 20 mA) ^*4
Power supply	Power voltage	24 VDC + 25%/–20% Including ripple Class 2 or LPS
	Current consumption	106 mA or less (Excluding Load Current)
Environmental resistance	Ambient temperature	−20°C to +60°C ^5 ^6 (no freezing)
	Relative humidity	Up to 85% RH (no condensation)
	Temperature of coupling used	–20 to +100°C (no freezing) ^5 ^6
	Vibration resistance	10–500 Hz Power spectral density: 0.816 G2; X, Y and Z directions
	Shock resistance	100 m/s² (10 G), 16 ms pulses, 1000 times each for X, Y and Z directions
Enclosure rating		IP67 (IEC60529), IP69K (ISO20653)
Protection circuit		Protection against reverse power connection, power supply surges, output overcurrent protection, and output surges
Weight		Approx. 900 g
^1 Guaranteed value in water with the recommended installation. Static water can be measured up to the edge of the lens. An undetectable area on the short-range side is created owing to the environment and measurement medium. The maximum measuring distance is also shortened. ^2 Measurement may not be possible depending on the shape and environment of the target. ^3 This is the guaranteed value from verification performed at KEYENCE inspection facilities. Measurement errors may occur depending on the customer’s environment. ^4 This is the guaranteed value from verification performed at KEYENCE inspection facilities with a load resistance of 250 Ω. Measurement errors may occur depending on the customer’s environment. ^5 Details of the operating temperature range of each model are shown below. The FR-S01 and FR-LM20/LP20 can be used up to an ambient temperature setpoint of 10°C by selecting “Off when not in Operation” under “Screen Brightness.” ^6 When performing SIP with FR-S01/FR-LM20/LP20/LS20, be sure to turn off the power and perform at an ambient temperature of 40°C or less and an internal temperature of 130°C or less for up to one hour. In addition, always install the KEYENCE optional ferrule mounting bracket and internal gasket.

Data Sheet (PDF) Other Models