Short range amplifier unit with separate display Zero Line Type Expansion unit FR-SA0

FR-SA0 - Short range amplifier unit with separate display Zero Line Type Expansion unit

*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.

Specifications

Model		FR-SA0
Type		Short Separated Amplifier Unit Zero line Expansion unit
Response time		0.4 s, 1.5 s, 4 s (default value), 10 s
Output	No. of control outputs	0
	Control output/auxiliary output	─
	Analogue output
External input
External communication		NU Series
Analogue output Precision	Resolution	─
	Zero accuracy
	Full-scale accuracy
Expansion		When connected with NU Series: Up to 16 units ^*1
Power supply	Power voltage	24 VDC +25%/−20%^2^3 including ripple, Class2 or LPS
	Power consumption	1620 mW max. (53 mA max. at 24V) (Excluding Load Current)
Environmental resistance	Ambient temperature	–20°C to +55°C (no freezing) ^*4
	Relative humidity	Up to 85% RH (no condensation)
Protection circuit		Protection against reverse power connection, power supply surges, output overcurrent protection, and output surges
Material		PC
Weight		Approx. 20 g
^1 Contact your local KEYENCE representative when adding more than the aforementioned number of units. When FR-SH01 is connected: 13 units. ^2 When expanding the FR-SA2 with the number of units indicated on the right or more, use a power voltage of 21.6 V or higher. When FR-S01 is connected: 1 unit; when FR-SH01 is connected: 8 units. ^3 When expanding the system by four or more FR-SA0 units with the FR-S01 connected or by ten or more FR-SA0 units with the FR-SH01 connected, use a power voltage of 21.6 V or higher. ^4 If the number of expansion units is one, the ambient temperature must be 50°C or less, and if the number of expansion units is two or more, the ambient temperature must be 45°C or less.

Data Sheet (PDF) Other Models