Short range amplifier unit with separate display M8 Connector Type Main Unit FR-SA1C

FR-SA1C - Short range amplifier unit with separate display M8 Connector Type Main Unit

*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.

Specifications

Model		FR-SA1C
Type		Short Separated Amplifier Unit M8 connector Main Unit
Response time		0.4 s, 1.5 s, 4 s (default value), 10 s
Output	No. of control outputs	Maximum 2
	Control output/auxiliary output	NPN/PNP open collector (switchable) Up to 30 VDC or less, max 50 mA for each Residual voltage of 1.4 V or less (50 mA or less) N.O./N.C. Switching type IO1 used in combination with IO-Link IO2 is used in conjunction with analogue output/external input
	Analogue output	0–20 mA/4–20 mA Maximum load resistance 260 Ω (Response time: 0.2 s (90% response) after control output is confirmed)
External input		Short circuit current: 1.5 mA or less Input time: 500 ms or more
External communication		IO-Link v1.1/COM2
Analogue output Precision	Resolution	1 mm ^*1
	Zero accuracy	±0.1 mA (zero point = 4 mA) ^*1
	Full-scale accuracy	±0.2 mA (full-scale = 20 mA) ^*1
Expansion		—
Power supply	Power voltage	24 VDC +25%/−20%^2^3 including ripple, Class2 or LPS
	Power consumption	1880 mW or less (63 mA or less at 24 V) (Excluding Load Current)
Environmental resistance	Ambient temperature	–20°C to +55°C (no freezing) ^*4
	Relative humidity	Up to 85% RH (no condensation)
Protection circuit		Protection against reverse power connection, power supply surges, output overcurrent protection, and output surges
Material		PC
Weight		Approx. 20 g
^1 This is the guaranteed value from verification performed at KEYENCE inspection facilities with a load resistance of 250 Ω. Measurement errors may occur depending on the customer’s environment. ^2 When expanding the FR-SA2 with the number of units indicated on the right or more, use a power voltage of 21.6 V or higher. When FR-S01 is connected: 1 unit; when FR-SH01 is connected: 8 units. ^3 When expanding the system by four or more FR-SA0 units with the FR-S01 connected or by ten or more FR-SA0 units with the FR-SH01 connected, use a power voltage of 21.6 V or higher. ^4 If the number of expansion units is one, the ambient temperature must be 50°C or less, and if the number of expansion units is two or more, the ambient temperature must be 45°C or less.

Data Sheet (PDF) Other Models