Short range amplifier unit with separate display Cable Type Expansion Unit FR-SA2

FR-SA2 - Short range amplifier unit with separate display Cable Type Expansion Unit

*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.

Specifications

Model		FR-SA2
Type		Short Separated Amplifier Unit Cable Expansion Unit
Response time		0.4 s, 1.5 s, 4 s (default value), 10 s
Output	No. of control outputs	Maximum 5
	Control output/auxiliary output	NPN/PNP open collector (switchable) up to 30 VDC or less, max 50 mA for each Total 750 mA or less for the entire amplifier when adding five or more expansion units Residual voltage 1.4 V or less (50 mA or less) N.O./N.C. switchable IO5 used in combination with external input
	Analogue output	─
External input		Short circuit current: 1.5 mA or less Input time: 500 ms or more
External communication		NU Series
Analogue output Precision	Resolution	—
	Zero accuracy
	Full-scale accuracy
Expansion		When added to FR-SA1 (FR-S01 connection): Up to 8 units (9 units including the parent machine) ^1 When added to FR-SA1 (FR-SH01 connection): Up to 12 units (13 units including the parent machine) ^1 When FR-SA2 is added to the NU Series: Up to 16 units ^*2
Power supply	Power voltage	24 VDC +25%/−20%^3^4 including ripple, Class2 or LPS
	Power consumption	When FR-S01 is connected: up to 1690 mW or less (60 mA or less at 24 V) When FR-SH01 is connected: up to 1310 mW or less (48 mA or less at 24 V) (Excluding Load Current)
Environmental resistance	Ambient temperature	–20°C to +55°C (no freezing) ^*5
	Relative humidity	Up to 85% RH (no condensation)
Protection circuit		Protection against reverse power connection, power supply surges, output overcurrent protection, and output surges
Material		PC
Weight		Approx. 90 g
^1 The number of expansion units can be increased by making the output current less than 750 mA in total. Contact your local KEYENCE representative for more details. ^2 Contact your local KEYENCE representative when adding more than the aforementioned number of units. When FR-S01 is connected: 6 units. When FR-SH01 is connected: 8 units. ^3 When expanding the FR-SA2 with the number of units indicated on the right or more, use a power voltage of 21.6 V or higher. When FR-S01 is connected: 1 unit; when FR-SH01 is connected: 8 units. ^4 When expanding the system by four or more FR-SA0 units with the FR-S01 connected or by ten or more FR-SA0 units with the FR-SH01 connected, use a power voltage of 21.6 V or higher. ^*5 If the number of expansion units is one, the ambient temperature must be 50°C or less, and if the number of expansion units is two or more, the ambient temperature must be 45°C or less.

Data Sheet (PDF) Other Models