Short range sensor head with separate display Compact liquid chemical model FR-SH01

FR-SH01 - Short range sensor head with separate display Compact liquid chemical model

*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.

Specifications

Model		FR-SH01
Type		Short range Compact liquid chemical model
Measuring range		Up to 1.5 m ^*1
Display range		Up to 2 m ^*1
Measurable dielectric constant of medium		2 or higher ^*2
Resolution		1 mm
Precision		Up to 0.1 m: ±20 mm; 0.1 to 0.3 m: ±5 mm; 0.3 to 1.5 m: ±1 mm ^*3
Response time		0.4 s, 1.5 s, 4 s (default value), 10 s
Tank pressure		-0.1 to +0.1 MPa
Material	Tank interior	Lens: PTFE Internal packing: FKM Joint: PPS
	Housing	PPS PPSU
Connection diameter		G3/4 (20 A)
Output	No. of control outputs	─
	Control output/auxiliary output
	Analogue output
External input
Network compatibility
Analogue output Precision	Resolution
	Zero accuracy
Analogue output accuracy	F.S. accuracy
Power supply	Power voltage
	Current consumption
Environmental resistance	Ambient temperature	–10 to +70°C ^4 ^5 (No freezing)
	Relative humidity	Up to 85% RH (no condensation)
	Temperature of coupling used	–10 to +85°C (no freezing) ^4 ^5
	Vibration resistance	10–500 Hz Power spectral density: 0.816 G2; X, Y and Z directions
	Shock resistance	100 m/s² (10 G), 16 ms pulses, 1000 times each for X, Y and Z directions
Enclosure rating		IP67 (IEC60529)
Protection circuit		Protection against reverse power connection, power supply surges, output overcurrent protection, and output surges
Weight		Approx. 140 g
^1 Guaranteed value in water with the recommended installation. Static water can be measured up to the edge of the lens. An undetectable area on the short-range side is created owing to the environment and measurement medium. The maximum measuring distance is also shortened. ^2 Measurement may not be possible depending on the shape and environment of the target. ^3 This is the guaranteed value from verification performed at KEYENCE inspection facilities. Measurement errors may occur depending on the customer’s environment. ^4 Details of the operating temperature range of each model are shown below. The FR-S01 and FR-LM20/LP20 can be used up to an ambient temperature setpoint of 10°C by selecting “Off when not in Operation” under “Screen Brightness.” ^*5 When performing SIP with FR-S01/FR-LM20/LP20/LS20, be sure to turn off the power and perform at an ambient temperature of 40°C or less and an internal temperature of 130°C or less for up to one hour. In addition, always install the KEYENCE optional ferrule mounting bracket and internal gasket.

Data Sheet (PDF) Other Models