Self-Contained Full-Spectrum Sensor
LR-W series
Specs Self-Contained Full-Spectrum Sensor LR-W series
Sensor
Model |
LR-W500 |
LR-W500C |
LR-W70 |
LR-W70C |
LR-WF10 |
LR-WF10C |
|||
Image |
|
|
|
|
|
|
|||
Type |
2 m cable type |
M12 connector 4-pin type |
Small/Dual Spot Type |
Small/Dual Spot Type |
Fiber Type |
Fiber Type |
|||
Detecting distance |
30 to 500 mm |
30 to 70 mm |
Detecting Distance and Min. Spot Diameter Based on Attached Fiber Head |
||||||
Min. spot diameter |
Adjustable spot |
Approx. 1.6 x 2.9mm at 50 mm |
|||||||
Light source |
White LED |
||||||||
Mutual interference reduction function |
Up to 2 units when alternate frequencies set |
||||||||
Timer |
OFF/ON delay/OFF delay/One-shot |
||||||||
Response time |
200 µs/1 ms/10 ms/100 ms/500 ms selectable *1 |
1-Spot Mode: 200 µs, 1 ms, 10 ms, 100 ms, 500 ms selectable |
250 µs, 1 ms, 10 ms, 100 ms, 500 ms Selectable*1*6 |
||||||
I/O |
Control output |
NPN open collector/PNP open collector selectable |
NPN open collector/PNP open collector selectable |
||||||
External input |
Tuning /Transmission OFF selectable |
||||||||
Protection circuit |
Protection against reverse power connection, power supply surge, output overcurrent, output surge, and reverse output connection |
||||||||
Power supply |
Power voltage |
10 to 30 VDC, including 10% ripple (P-P), Class 2 or LPS |
|||||||
Current consumption |
65 mA or less (without load) at 24 VDC; |
60 mA or less (without load) at 24 VDC; |
50 mA or less (without load) at 24 VDC; |
||||||
Environmental resistance |
Enclosure rating |
IP65/IP67 (IEC60529) |
IP65/IP67 (IEC60529) |
IP65 (IEC60529)*8*9 |
|||||
Ambient light |
Incandescent lamp: 10,000 lux or less, Sunlight: 20,000 lux or less |
||||||||
Ambient temperature |
-20 to +50 °C (No freezing) |
-20 to +45 °C (No freezing) |
|||||||
Relative humidity |
35 to 85 % RH (No condensation) |
||||||||
Vibration resistance |
10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions |
||||||||
Shock resistance |
1,000 m/s2, 6 times in each of the X, Y, and Z directions |
||||||||
Material |
Case: Zinc die cast (Nickel chrome plating), |
Case: Zinc die cast (Nickel chrome plating), |
Case: Zinc die cast (Nickel chrome plating), |
Case: Zinc die cast (Nickel chrome plating), |
Case: Zinc die cast (Nickel chrome plating), |
Case: Zinc die cast (Nickel chrome plating), |
|||
Weight |
Approx. 170 g (including cable) |
Approx. 110 g |
Approx. 130 g (including cable) |
Approx. 75 g |
Approx. 150 g (including cable) |
Approx. 95 g |
|||
*1 When alternate frequencies are set, the response time increases by approximately 20%. |